Loading...

VW Transporter T4 Alloy Wheels

Alloy Wheels for VW Transporter T4

VW T4 Image

RaceandRoad.com offer a large range of high load, full approved alloy wheels and tyres for the Volkswagen Transporter T4 Van. All our wheels 16"-20" are approved.

To see our range of alloy wheels for T4 click here >>


More information about alloy wheels on Volkswagen T4 Transporter Vans:
The VW T4 is an excellent, well engineered and highly regarded light commercial vehicle. Used more so for leisure and camper conversions, you should always be careful about fitting alloy wheels onto your transporter.

RaceandRoad.com are the most experienced company in the UK in the supply of high load, approved alloy wheels for the T4 transporter. Every wheel we offer has been tried, tested and approved for application. Our suppliers: Borbet, Ronal and Autec also supply VW for their original fit wheels or their accessory wheels. We offer 16"-19" wheels for the T4, click here to see our range. Using our website, you can also view our wheels on your transporter and spec up your wheel and tyre package to your requirements.

Fitment Information:
The specific fitment of the VW Transporter T4 van is as follows:
PCD (Stud Pattern): 5x112
ET (Offset Range): 35-50
Centre Bore: 57.1 
Bolt Requirements: M14x1.5 Radius Seated. 

PCD Stud Pattern Image


The fitment information above about the vehicle represents fitments of the wheels approved for the T5. The offset is dependent on and measured relative to the width of the wheel, which is why it is a range and not a fixed number. The centre bore is fixed number and all of the wheels in our range are cut directly for the T4 application, where some companies may use spigot rings to bring a universal bore size down to the size you need, we do not, we cut specifically for the T5 just as volkswagen would fit. Retro fitting wheels not intentionally produced for a T5 is not advisable, often load ratings on the rear or both axles would not be high enough, you may experience vibrations at motorway speeds and without an approval certificate from a trusted source your insurance may not be valid.

Approval Certification:
The company that approve these applications are a huge european application testing body called TÜV. In Germany it is required by law that any aftermarket product fitted to any vehicle must be approved by the TÜV and the appropriate certificates must be carried in the vehicle. The testing that all TÜV approved wheels are subject to include: Application of a wheel for a specific wheel model for use on a specific vehicle model, Load capacity test specific to vehicle model, Appropriate tyre size and load testing, Nut/bolt specifications and tentioning measurements. Other tests include: X-ray scans of every single wheel, UV tests for paint finishing longevity, Prolonged usage simulation testing to replicate long term usage and more. When we supply a wheel to you, we supply the TÜV approval certificate to you, this is because you may be required to proove that your wheels are suitable for use by your insurance company, especially in the event of a claim. We also supply them for your own pease of mind. Click here to see an example of a valid approval certificate >>

TUEV Logo 

For more information please contact us or call us 0870 766 26 86. Or click here to view our range >>

Better Products for the UK